Task List for this page.
Expand and separate into separate articles.

Type 18 Shuttlepod

Type: Medium short-range sublight shuttle.
Accommodation: Two; pilot and system manager.
Power Plant: Two 800 millicochrane impulse driver engines, four RCS thrusters, four sarium krellide storage cells.
Dimensions: Length, 4.5 m; beam, 3.1 m; height 1.8 m.
Mass: 1.12 metric tones.
Performance: Maximum delta-v, 16,750 m/sec.
Armament: Three Type-V phaser emitters.

Developed in the mid-2360s, the Type-18 Shuttlepod is somewhat of a departure from the traditional layout for ships of its size. In response to the growing threat of conflicts with various galactic powers bordering or near to the Federation, this shuttlepod was designed to handle more vigorous assignments that still fell into the short-range roles of a shuttlepods. Even with her parent vessel under attack, the Type-18 was designed to function in battle situations and could even be used as an escape vehicle should the need arise. Lacking a warp core, the pod is a poor choice for travel beyond several million kilometers. Ships of this type are seeing limited deployment on various border patrol and defensive starship classes, including the Defiant-, Sabre-, and Steamrunner-class.

Type 7 Personal Shuttle

Type: Medium short-range warp shuttle.
Accommodation: Two flight crew, six passengers.
Power Plant: One 150 cochrane warp engine, two 750 millicochrane impulse engines, four RCS thrusters.
Dimensions: Length, 8.5 m; beam, 3.6 m; height 2.7 m.
Mass: 3.96 metric tones.
Performance: Sustained Warp 4.
Armament: Two Type-V phaser emitters.

With the borders of the Federation ever expanding as Starfleet reached the latter half of the 24th Century, the ASDB realized that there was sufficient need for a shuttlecraft capable of making the week-long journeys between planets and stations at low warp. The Type-7 was the first step in this direction, and is equipped for short-range warp travel. To offer comfort to its occupants, the shuttle contains a standard replicator system and sleeping compartments. The forward and aft compartments are separated by a small, informal living area that has a workstation and table. The aft area is normally equipped with a bunk area, but can easily be converted to allow for increased cargo capabilities. A medium-range transporter and atmospheric flight capabilities allow for the Type-7 to service starbases, starships and stations. Ships of this type are currently in use aboard most medium to large sized starship classes, as well as aboard stations and Starbases.

Major technological advancements in the 2370’s allowed for further upgrades to be made to the engine systems aboard shuttlecraft. These upgrades make this craft more capable of long-range spaceflight and, like its starship counterparts, no longer damages subspace.

Type 6 Personal Shuttle

Type: Light short-range warp shuttle.
Accommodation: Two flight crew, six passengers.
Power Plant: One 50 cochrane warp engine, two 750 millicochrane impulse engines, four RCS thrusters.
Dimensions: Length, 6.0 m; beam, 4.4 m; height 2.7 m.
Mass: 3.38 metric tones.
Performance: Sustained Warp 3.
Armament: Two Type-IV phaser emitters.

The Type-6 Personnel Shuttlecraft is currently in widespread use throughout Starfleet, and is only recently being replaced by the slightly newer Type-8 Shuttle of similar design. The Uprated version of this vessel is considered to be the ideal choice for short-range interplanetary travel, and its large size makes it suitable to transport personnel and cargo over these distances. A short-range transporter is installed onboard, allowing for easy beam out of cargo and crew to and from their destination. Atmospheric flight capabilities allow for this shuttle type to land on planetary surfaces. Ships of this type are currently in use aboard virtually every medium to large sized starship class, as well as aboard stations and Starbases.

The Type-6 is perhaps the most successful shuttle design to date, and its overall structure and components are the foundations upon which the Type-8, -9, and -10 spaceframes are based.

Major technological advancements in the 2370’s allowed for further upgrades to be made to the engine systems aboard shuttlecraft. These upgrades make this craft more capable of long-range spaceflight and, like its starship counterparst, no longer damages subspace.

Type M-1 Sphinx Workpod

Type: Light industrial manipulator (Sphinx M1A), medium industrial manipulator (Sphinx M2A), medium tug (Sphinx MT3D).
Accommodation: Pilot (M1A, M2A); pilot and cargo specialist (MT3D).
Power Plant: One microfusion reactor, four alfinium krellide power storage cells, four RCS thrusters.
Dimensions: Length, 6.2 m; beam, 2.6 m; height 2.5 m.
Mass: 1.2 metric tones.
Performance: Maximum delta-v, 2,000 m/sec.
Armament: None

Along with the Work Bee, the various Sphinx Workpod types are a common site in any large Federation shipbuilding facility. Intended never to be far from its parent facility, the Workpod was designed to allow greater user hands-on control of the various functions involved with day-to-day construction and repair. With more tools then the Work Bee, the Sphinx M1A and M2A are used primarily to manipulate spaceborne hardware during construction. The Sphinx MT3D is a third variant of this robust design, and can be used for towing objects to and from the construction site. Furthermore, a group of MT3D units can work together to tow larger objects into place, including most starship classes, when large tractor emitters are not an option. All three variants utilize the same basic systems, and are small enough to fit inside of a Type-9A Cargo Shuttlecraft. All variants of the Sphinx Workpod are commonly found at Federation Fleet Yards and Starbases, as well as on larger Starfleet vessels.